hasemfs.blogg.se

Default username and password for brocade san switch
Default username and password for brocade san switch






default username and password for brocade san switch

Specify 0 to disable the port frombeing trunked. Mode Specify 1 to enable this port for trunking. portnumber indicates the port number to be configured. Use switchShow to display a list of valid ports. portnumber Specify a port number to be configured, relative to its slot for bladed systems.

default username and password for brocade san switch

slotnumber is a parameter used in the blade system and indicates the number of blades. Portcfgtrunkport portnumber mode slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). PortCfgTrunkPort Configures a port to enable or disable trunking. To enable trunking on a switch: switch: admin> switchcfgtrunk 0 Committing configuration. switchcfgtrunk is followed by parameters of 0 or 1, 0 means turning trunking off, and 1 means turning trunking on. Specify 0 to disable trunking on all the ports on this switch. switchCfgTrunk is a switch command to enable and disable the trunking function of the switch switchcfgtrunk mode mode Specify 1 to enable trunking on all the ports on this switch.

default username and password for brocade san switch

swd77 login: root Password: fibranne After logging in with this account, the following message will appear: Disclaimer for Root and Factory Accounts Usage! admin> trunkshow // Check trunking status switchCfgTrunk Enables or disables trunking on all the ports of a switch. This account is used to reset the switch password. The os of Brocade 300 is the core of Linux 2.6, and the management account with the highest authority is root. Brocade switches do not have a reset button and must be reset via a command via a console cable connection. Since the user of this machine has done the setting, the password needs to be reset after changing it.

#Default username and password for brocade san switch license#

Brocade Slikworm 300 switch swd77: admin> licenseshow XSCJBCmH3SARFa7BXrVVBGGFFRRXBArGR: Fabric license // Cascade License Enhanced Group Management license // Enhanced group management authorization 8 Gig FC license // 8Gb authorization swd77: admin> Brocade Brocade switch modify password command In the command line mode of Brocade switch, the user password can be changed through the passwd command: Take brocade 300 as an example: swd77: admin> passwd #Use the passwd command to modify the current user password Changing password for admin Enter old password: #Enter the current password Enter new password: #Enter the new password Re-type new password: OFF Area Port Media Speed ​​State Proto = 0 0 id N4 No_Light 1 1 id N4 No_Light 2 2 id N4 No_Light 3 3 id N4 No_Light 4 4 id N4 No_Light 5 5 id N4 No_Light 6 6 id N4 No_Light 7 7 id N4 No_Light 8 8 id N4 No_Light 9 9 id N4 No_Light 10 10 id N4 No_Light 11 11 id N4 No_Light 12 12 id N4 No_Light 13 13 id N4 No_Light 14 14 id N4 No_Light 15 15 id N4 No_Light swd77: admin> Brocade SAN switch password reset The default username of Brocade 300 is admin and the default password is password. Fabric license is a cascade license authorization, which I added later, the default 210E switch is not available. Brocade Slikworm 210E switch authorization status swd77: admin> licenseshow RzcQSXXXCS0RTc: Unknown1 license S9zXXXCSzRTScl: Unknown2 license b9QQGGHJHARRdF: Fabric license swd77: admin> Two of these Unknown1 and Unknown2 authorizations should be two 4-port authorizations. In the command line mode, the IP address of the switch can be set and modified through the ipaddrset command swd77: admin> ipaddrset Ethernet IP Address : #Enter the IP address of the switch to be set Ethernet Subnetmask : #Enter the mask Fibre Channel IP Address : Fibre Channel Subnetmask : Gateway IP Address : # Enter the gateway DHCP : #Whether to enable DHCP swd77: admin> Brocade switch to view OS version information swd77: admin> version Kernel: 2.6.14.2 // Linux kernel version Fabric OS: v6.1.0a // switch OS version Made on: Thu Apr 17 21 : 45: 31 2008 // Production date Flash: Tue Jan 13 23:33:44 2009 BootProm: 4.6.6 swd77: admin> Brocade switch add li cense authorization information swd77: admin> licenseadd XXXXXXXX (Brocade activation number) View Brocade switch license authorization information In the command line mode, use the licenseshow command to view the license status of the Brocade switch, and use the licenseadd command to add a license. Brocade switch view IP address command swd77: admin> ipaddrshow SWITCH Ethernet IP Address: 10.77.77.77 Ethernet Subnetmask: 255.255.255.0 Fibre Channel IP Address: none Fibre Channel Subnetmask: none Gateway IP Address: none DHCP: Off swd77: admin> settings Brocade switch IP address The default IP address of the Brocade switch is 10.77.77.77.








Default username and password for brocade san switch